Square Gift Box with Lid

A project from our live show CREATE TOGETHER CLUB - CHAPTER 2 - Join Toni for Inspiration show 7 using the third stamp in the collection called HAPPY HOME - Broadcast 3rd May 23 · 05/03/2023 · watch it from 13:15

A simple square box made from two pieces of card without complex measurements. The lid fits neatly over the base with a small border, perfect for gifting cards, envelopes or small items.

DOWNLOAD THIS GUIDE (PDF)

Step by step

1. Cut two pieces of card to the same size, for example 8 by 8 inches. ▶ watch 13:30
2. From one piece, cut a tiny sliver off the top edge and a tiny sliver off one side edge only—do not cut all four sides or the box will be baggy. ▶ watch 14:15
3. Score the smaller piece 1 inch in from all four edges to create fold lines. ▶ watch 15:00
4. Score the larger piece 1 inch in from all four edges in the same way. ▶ watch 15:15
5. Cut along one straight score line from the corner, then cut from the corner of the box inward to create hinges at each corner. ▶ watch 16:00
6. Remove the top point at each corner by trimming away the tip to ensure the sides sit flush. ▶ watch 16:30
7. Glue or tape the four side flaps together, starting with the cleanest side facing outward. ▶ watch 19:00
8. Assemble the second piece in the same way to create the matching lid or base. ▶ watch 22:30

Tips from the show

• Use tape pen and glue together for longevity, as glue alone dries out over time.
• Use 300 gsm card for a sturdy box, or 250 gsm minimum—do not go lower or it will look shabby.
• Only cut a tiny sliver off two sides to avoid a baggy fit.

More from this show

• Swinging Tag for Gift Box
• 3D Decoupage House Card
• Hidden Message Foldout Card
• Ribbon-Wrapped Gift Box with Bow

Written up from the show itself. See every guide from our shows · free how-to guides · watch live on My Telly