Layering Stencil Bluebell Card

A project from our live show HOBBYMAKER TV - Join us for the latest show - Broadcast 5 p.m. (UK) 15th August 2026 · 08/15/2026 · watch it from 40:00

Use a five-layer stencil system to create depth and dimension in a floral design. Build up colour gradually with each stencil layer to achieve a professional, multi-coloured effect.

DOWNLOAD THIS GUIDE (PDF)

Step by step

1. Prepare a white or cream card blank as your base. ▶ watch 40:15
2. Select stencil number one and align it with the edge of your card, checking that the number is visible on the correct side. ▶ watch 40:30
3. Choose a dye-based ink colour (such as purple) and tap it lightly through the stencil using a sponge or brush. ▶ watch 40:45
4. Apply stencil number two in the same position and add more colour, pressing slightly harder to build depth. ▶ watch 41:00
5. Continue with stencils three, four and five, gradually increasing the pressure and colour intensity with each layer. ▶ watch 41:30
6. For the final layer, press firmly to create the darkest, most defined areas of the design. ▶ watch 42:00
7. If desired, add a contrasting colour (such as green) to the leaves or stems using the same stencil system. ▶ watch 42:30
8. Allow the card to dry completely before removing the stencils. ▶ watch 43:00
9. Optional: spray the finished design lightly with water to create an ethereal, blended effect for artistic variation. ▶ watch 43:30

Tips from the show

• Start with light pressure and build up gradually—you can always add more colour, but you cannot remove it.
• Keep the stencil aligned with the edge of your card for consistent placement of all layers.
• If you make a mistake or the layers don't line up perfectly, spray with water to blend and soften the effect into an artistic finish.

More from this show

• Lamination Stamp Card with Watercolour Effect
• Layering Stencil Classic Rose Card

Written up from the show itself. See every guide from our shows · free how-to guides · watch live on My Telly