Fallen Stars Gold Embossed Ombre Card

Un proyecto de nuestro programa en vivo MONDAY MADNESS - Acompaña a Simon de AVAGO-INK con sus productos más nuevos e inspiración - Transmisión: 1 ago 22 · 08/01/2022 · velo desde 2:15

A celebration card featuring a large fallen stars background stamp embossed in gold, layered over a watercolour ombre background in green. The design includes die-cut apertures and dimensional letter elements spelling 'STAR' with drop shadow effects.

Vas a necesitar

100089 - HTCN - EUREKA 101 TABLA PARA ACUARELA Y MARCADO - 240921gVERLO

DESCARGA ESTA GUÍA (PDF)

Paso a paso

1. Cut a strip of watercolour card measuring 4.5 inches wide, leaving extra length for security with a magnet during embossing. ▶ watch 3:00
2. Position the fallen stars A5 stamp on the watercolour card using a stamping platform and magnet to secure it. ▶ watch 3:15
3. Tap an anti-static bag over the stamp to remove excess powder, then apply embossing powder using a good push down to ensure all detail is covered. ▶ watch 3:30
4. Heat the embossing powder with a heat gun, moving it around to ensure even melting and a shiny finish across all the stars and details. ▶ watch 5:45
5. Collect any loose embossing powder flakes in a tub to avoid waste, then tap off excess and heat again for a twinkly finish. ▶ watch 6:15
6. Trim the embossed card down to 7 inches in length using a cutter. ▶ watch 8:15
7. Wet the watercolour card with water using a brush, then apply a rich emerald green watercolour wash from the top, creating an ombre effect by dragging it down lighter towards the bottom. ▶ watch 9:00
8. Deepen the green wash with more pigment, building up the colour gradually and dragging it back down to create a blended ombre effect. ▶ watch 10:30
9. Dry the watercoloured card with a heat gun on both sides to flatten it out and set the colour. ▶ watch 11:30
10. Position square dies on the card using masking tape to mark where apertures will be cut, creating a focal point in the centre. ▶ watch 13:00
11. Run the masked card through a die cutter to create the square apertures. ▶ watch 14:00
12. Layer the embossed and watercoloured card onto white card, then black card, then gold card, using tape to secure each layer and ensuring the gold edge shows evenly all around. ▶ watch 15:45
13. Stamp the word 'STAR' onto black and gold card strips using letter stamps, creating drop shadow effects by layering black letters with a diagonal offset of gold letters behind. ▶ watch 18:00
14. Die-cut a star shape from both black and gold card to create a layered star element. ▶ watch 20:15
15. Attach foam pads to the back of the square aperture and star to raise them dimensionally above the card base. ▶ watch 23:30
16. Position the layered letters in the centre of the square, starting with the middle letters and working outwards to ensure even spacing. ▶ watch 24:45

Consejos del programa

• Always start positioning letters from the middle and work outwards to ensure they are centred and evenly spaced.
• Watercolour fades back slightly as it dries, so you may need to add more pigment than you think necessary.
• Gold embossing works well with any colour background and gives a classy, versatile finish suitable for any occasion.

Más de este programa

• Farmyard Flower Border Birthday Card

Redactado a partir del propio programa. Mira todas las guías de nuestros programas · guías paso a paso gratis · mira en vivo en My Telly