Blackout Technique Card with Heat Embossed Dress Design

Un proyecto de nuestro programa en vivo LANZAMIENTO DEL VIERNES - Acompaña a Toni con sus productos más nuevos y demostraciones - Transmitido el 5 de agosto de 2022 · 08/05/2022 · velo desde 12:30

A striking card featuring a heat-embossed dress silhouette that is coloured with ink sprays and finished with a blackout technique. The embossing acts as a resist, allowing you to layer colour and create a dramatic, multi-dimensional effect with splatter details.

Vas a necesitar

100089 - HTCN - EUREKA 101 TABLA PARA ACUARELA Y MARCADO - 240921gVERLO IZINK SPRAY BLUE MOON 080621wVERLO IZINK SPRAY WILD ROSE 080621xVERLO IZINK SPRAY BLACK LIQUORICE 080621tVERLO IZINK SPRAY HONEY 080621rVERLO IZINK SPRAY SUNFLOWER YELLOW 080621nVERLO IZINK SPRAY PURPLE LAVENDER 080621kVERLO IZINK SPRAY TURQUOISE 080621jVERLO

DESCARGA ESTA GUÍA (PDF)

Paso a paso

1. Prepare a piece of mount board or thick card stock as your base. ▶ watch 13:45
2. Use a clear sticky ink pad to stamp the dress image onto your board, pressing firmly to capture all the detail. ▶ watch 14:00
3. Apply clear embossing powder over the stamped image, ensuring full coverage. ▶ watch 14:30
4. Heat set the embossing powder with a heat tool until it is fully melted and glossy. ▶ watch 15:00
5. Place the card in a box and spray the entire surface with black ink spray, allowing the embossed areas to act as a resist. ▶ watch 18:45
6. Remove the card from the box and use a tissue to wipe away excess black spray, revealing the coloured dress underneath. ▶ watch 46:00
7. Add white confetti ink splats across the card by tapping your brush at varying heights to create different sized splatter effects. ▶ watch 47:00
8. Optional: add gold or additional coloured splats to enhance the design. ▶ watch 48:30
9. Wipe away any ink that has settled on the embossed lines using a damp tissue to keep them clean and defined. ▶ watch 49:00
10. Optional: add watercolour or paint details to specific areas such as flowers by first creating a white base with confetti ink, then painting over it once dry. ▶ watch 54:00

Consejos del programa

• If you have a bad wrist or cannot do blending brush motions, use black ink spray instead of blending with a brush around the edges.
• The embossing powder acts as a resist, so any ink sprayed over it will not stick to the embossed areas.
• Tap your brush close to the card for small splats, or hold it higher for larger splatter effects.

Redactado a partir del propio programa. Mira todas las guías de nuestros programas · guías paso a paso gratis · mira en vivo en My Telly