Double Tower Pop-Out Card with Sprayed Gradient Background

Un proyecto de nuestro programa en vivo MONDAY MADNESS - Acompaña a Simon de AVAGO-INK y descubre sus productos más recientes - Transmitido el 16 ENE 23 · 01/16/2023 · velo desde 1:45

A dimensional pop-out card that folds flat to fit a 5x7 envelope. The card features a striking blue-to-yellow gradient background created with ink sprays, decorative stamped panels, and a fussy-cut character topper that stands proud on foam pads.

Vas a necesitar

IZINK SPRAY BLACK LIQUORICE 080621tVERLO IZINK SPRAY WILD ROSE 080621xVERLO IZINK SPRAY SUNFLOWER YELLOW 080621nVERLO 100089 - HTCN - EUREKA 101 TABLA PARA ACUARELA Y MARCADO - 240921gVERLO 100572 - HTCN - AVAGO-INK DESIGNS - SELLO A5 - COOKIE - 100522cVERLO STAMPS BY ME - TINTA HÍBRIDA PREMIUM - MIDNIGHT - 121022NVERLO

DESCARGA ESTA GUÍA (PDF)

Paso a paso

1. Cut a piece of linen textured card to 7 by 9 inches. ▶ watch 2:30
2. Spray the card with yellow ink spray on the lower section, then blend blue ink spray from the top to create a gradient effect. ▶ watch 3:00
3. Dry the sprayed card with a heat gun to set the inks. ▶ watch 3:45
4. Use a scoring tool to score the card at 1, 2, and 3 inches on one side, then at 6, 7, and 8 inches on the other side. ▶ watch 5:00
5. Crease all score lines in both directions using a bone folder to ease the card. ▶ watch 6:00
6. Fold the scored sections to create the tower effect, alternating which strips fold up and down on each side. ▶ watch 6:30
7. Mark half-inch increments along the length of the card using a pencil and scoring mat as a ruler. ▶ watch 7:00
8. Cut vertical slits down to the first score line at each half-inch mark using scissors. ▶ watch 8:15
9. Push alternate slits inward to create the dimensional tower pattern, creasing with a bone folder. ▶ watch 9:45
10. Cut decorative panels measuring 6½ by 2½ inches for the centre and ½ by 6½ inches for the outer strips. ▶ watch 12:00
11. Stamp the gaming-themed background image onto the decorative panels using black ink, positioning stamps to create a continuous pattern. ▶ watch 12:45
12. Spray the stamped panels with yellow ink on the lower section and blue ink on the upper section, opposite to the card base gradient. ▶ watch 15:15
13. Glue the matted decorative panels onto the tower card base using wet glue, ensuring panels are centred and secure. ▶ watch 17:00
14. Stamp the character image (Crash) onto white card using black ink, then fussy cut around the character to remove the background. ▶ watch 19:30
15. Spray the fussy-cut character with blue ink, then add yellow ink to the sentiment text for contrast. ▶ watch 20:45
16. Attach foam pads to the back of the character and adhere it to the card, positioning it to pop forward. ▶ watch 24:45

Consejos del programa

• You can fold the tower effect either direction and it will still work postably.
• If some cuts are slightly off, it won't ruin the effect as the card will still work.
• You don't need to buy every colour of ink spray; two colours can create versatile effects through layering and positioning.

Más de este programa

• Scrap Card Collage with Stamped Backgrounds and Pearl Embellishments

Redactado a partir del propio programa. Mira todas las guías de nuestros programas · guías paso a paso gratis · mira en vivo en My Telly